2 Part Cementitious Waterproofing Membrane

2 PART is a cementitious, two-part waterproofing membrane 2 PART is based on high alumina, fast-setting cement. It is mixed with a high solids water resistant pure acrylic. 2 PART combines the quick drying and excellent adhesion characteristics of traditional 2-part membranes with the superb toughness, elongation, and flexibility of modern acrylic membranes. 2 PART has been designed to pass all the requirements of AS4654.1:2012 for Class II waterproofing membranes. Designed for use as an under-tile membrane on balconies, roofs, and some swimming pools. 2 PART has excellent adhesion to concrete, cement screeds and most F/C sheet. It is used with RLA elastic waterproof tape for maximum performance and ease of use.

RECOMMENDED USE

Concrete after curing 28 days
Masonry / render after curing at least 7 days
Cement sheeting / underlay / external weatherboard / blue board
Pre-cast concrete once the release agent has been removed/ dissipated
Wet area plasterboard / Villaboard
Structural Plywood Type A (PAA JAS-ANZ)
Brickwork, Hebel (aggregate block)

Technical Data Sheet (TDS)

2 Part

Safety Data Sheet (SDS)

2 Part Cementitious Waterproofing Membrane

Product Calculator

Notched trowel depth

Floor area (m²)

Wall flashings and hob area (m²)

Include vertical wall zones, hobs, and other details in addition to the floor.

Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

Bridging Production
with innovation.

Watch how 2 Part Cementitious Waterproofing Membrane gets used

Joins a range of Respirable Crystalline Silica free products.

GREEN PHD CERTIFIED

Joins a range of Respirable

2 Part Cementitious Waterproofing Membrane

Crystalline Silica free products.

RLA