Email Address

sales@rlapolymers.com.au

Phone Number

1800 242 931

Tradies trust badge
Phone Number

1800 242 931

Calculators

How to Use the RLA Calculators

Select the calculator for the material you are using, then enter the project measurements requested on screen to estimate quantities. These are planning estimates: check the latest product technical data sheet for application rates and allow for substrate condition, surface preparation, installation method and site waste. Explore the RLA product range to find suitable materials.

Filters

Flooring Levellers

  • F23 Feather (15 kg pail)

    F23 Feather (15 kg pail)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel BulkFill UT (20 kg bag)

    TruLevel BulkFill UT (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel EconoPro: TruLevel EconoPro

    TruLevel EconoPro

    TruLevel EconoPro

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel EconoPro Plus (20 kg bag)

    TruLevel EconoPro Plus (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel EconoScreed (20 kg bag)

    TruLevel EconoScreed (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel EconoScreed Rapid (20 kg bag)

    TruLevel EconoScreed Rapid (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel Fine Finish

    TruLevel Fine Finish

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel Flexi (20 kg bag)

    TruLevel Flexi (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel Rapid Patch Repair Mortar (20 kg bag)

    TruLevel Rapid Patch Repair Mortar (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel SL Self Leveling Compound (20 kg bag)

    TruLevel SL Self Leveling Compound (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

  • TruLevel Tuff Top Self-Smoothing Overlay (20 kg bag)

    TruLevel Tuff Top Self-Smoothing Overlay (20 kg bag)

    50 m²
    1 m² 100 m²

    Adjust the slider to represent the floor area you need to cover.

    3 mm
    1 mm 20 mm

    Set your applied thickness — coverage is adjusted from the rated 1 mm value.

    Results are estimates only and may not reflect real-world conditions. Use figures as a rough guide and confirm quantities for your job before ordering.

Grouts

  • Luminous EF: Luminous EF

    Luminous EF

    Luminous EF

    mm
    mm
    mm
    mm
    m²

    Coverage is indicative only and may vary with application, substrate, and site conditions. Always refer to the product datasheet.

  • Luminous SSG: Luminous SSG

    Luminous SSG

    Luminous SSG

    mm
    mm
    mm
    mm
    m²

    Coverage is indicative only and may vary with application, substrate, and site conditions. Always refer to the product datasheet.

Tile Adhesives

  • Addflextra Tile Adhesive: Addflextra Tile Adhesive
    Notched trowel depth

    Addflextra Tile Adhesive

    Addflextra Tile Adhesive

    View product

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • Moreflex Tile Adhesive (20 kg bag)
    Notched trowel depth

    Moreflex Tile Adhesive (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA FastSet Grey Tile Adhesive (20 kg bag)
    Notched trowel depth

    RLA FastSet Grey Tile Adhesive (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA Mastik Tile Adhesive (20 kg bag)
    Notched trowel depth

    RLA Mastik Tile Adhesive (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA Tileflex Tile Adhesive (20 kg bag)
    Notched trowel depth

    RLA Tileflex Tile Adhesive (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA Unilite S1 (12.5 kg bag)
    Notched trowel depth

    RLA Unilite S1 (12.5 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • StoneSet Tile Adhesive (20 kg bag)
    Notched trowel depth

    StoneSet Tile Adhesive (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • TileBond Extra Tile Adhesive (20 kg bag)
    Notched trowel depth

    TileBond Extra Tile Adhesive (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • Trade Mastik (20 kg bag)
    Notched trowel depth

    Trade Mastik (20 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • UniGrip Tile Adhesive
    Notched trowel depth

    UniGrip Tile Adhesive

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • UniLite S2 (12.5 kg bag)
    Notched trowel depth

    UniLite S2 (12.5 kg bag)

    Estimated rate scales with notch depth; verify the actual rate for your trowel, adhesive, and tile back-buttering in the product TDS.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

Flooring Adhesives

  • MS Timber Adhesive: MS Timber Adhesive
    Notched trowel depth

    MS Timber Adhesive

    MS Timber Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RL1000 SMP Flooring Adhesive: RL1000 SMP Flooring Adhesive
    Notched trowel depth

    RL1000 SMP Flooring Adhesive

    RL1000 SMP Flooring Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RL1001 SMP Timber Adhesive: RL1001 SMP Timber Adhesive
    Notched trowel depth

    RL1001 SMP Timber Adhesive

    RL1001 SMP Timber Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA 265 Universal Vinyl Adhesive: RLA 265 Universal Vinyl Adhesive
    Notched trowel depth

    RLA 265 Universal Vinyl Adhesive

    RLA 265 Universal Vinyl Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA High Temp Vinyl Plank Adhesive: RLA High Temp Vinyl Plank Adhesive
    Notched trowel depth

    RLA High Temp Vinyl Plank Adhesive

    RLA High Temp Vinyl Plank Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA HS Water-Based Timber Adhesive: RLA HS Water-Based Timber Adhesive
    Notched trowel depth

    RLA HS Water-Based Timber Adhesive

    RLA HS Water-Based Timber Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA Vinyl Plank & Tile Adhesive: RLA Vinyl Plank & Tile Adhesive
    Notched trowel depth

    RLA Vinyl Plank & Tile Adhesive

    RLA Vinyl Plank & Tile Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • RLA999 PSA Carpet Adhesive: RLA999 PSA Carpet Adhesive
    Notched trowel depth

    RLA999 PSA Carpet Adhesive

    RLA999 PSA Carpet Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • Universal PSA Flooring Adhesive: Universal PSA Flooring Adhesive
    Notched trowel depth

    Universal PSA Flooring Adhesive

    Universal PSA Flooring Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • X3 SMP All-in-One Timber Adhesive: X3 SMP All-in-One Timber Adhesive
    Notched trowel depth

    X3 SMP All-in-One Timber Adhesive

    X3 SMP All-in-One Timber Adhesive

    Ranges use the lower spread rate to conservatively estimate material.

    10%
    0%100%

    Most common overage is 10%. Adjust for site conditions and application losses.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

Waterproofing Membranes

  • 1Kompönent Fibre Reinforced Waterproof Membrane: 1Kompönent Fibre Reinforced Waterproof Membrane
    Notched trowel depth

    1Kompönent Fibre Reinforced Waterproof Membrane

    1Kompönent Fibre Reinforced Waterproof Membrane

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • 2-Part Cementitious Waterproofing Membrane Kit: 2-Part Cementitious Waterproofing Membrane Kit
    Notched trowel depth

    2-Part Cementitious Waterproofing Membrane Kit

    2-Part Cementitious Waterproofing Membrane Kit

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • Aliphatic Top Coat Waterproofing: Aliphatic Top Coat Waterproofing
    Notched trowel depth

    Aliphatic Top Coat Waterproofing

    Aliphatic Top Coat Waterproofing

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • Moisture Seal Epoxy Waterproofing System: Moisture Seal Epoxy Waterproofing System
    Notched trowel depth

    Moisture Seal Epoxy Waterproofing System

    Moisture Seal Epoxy Waterproofing System

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • PU850 Liquid Waterproofing Membrane: PU850 Liquid Waterproofing Membrane
    Notched trowel depth

    PU850 Liquid Waterproofing Membrane

    PU850 Liquid Waterproofing Membrane

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • WPM Class III Liquid Waterproofing Membrane (15 L pail): WPM Class III Liquid Waterproofing Membrane (15 L pail)
    Notched trowel depth

    WPM Class III Liquid Waterproofing Membrane (15 L pail)

    WPM Class III Liquid Waterproofing Membrane (15 L pail)

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

  • WPU Class III Liquid Waterproofing Membrane (15 L pail): WPU Class III Liquid Waterproofing Membrane (15 L pail)
    Notched trowel depth

    WPU Class III Liquid Waterproofing Membrane (15 L pail)

    WPU Class III Liquid Waterproofing Membrane (15 L pail)

    Include vertical wall zones, hobs, and other details in addition to the floor.

    Estimates only. Coverage varies with application thickness, substrate porosity and level, application technique, site conditions, and wastage. Include all required floor and wall areas for membranes. Confirm rates, required film thickness, coats, and final quantities against the product TDS and applicable requirements before ordering.

Request More Info

Specification